User guide

PPPoE command reference PPPoE
8-73
iMG/RG Software Reference Manual (ADSL Port)
8.7.4.1.4 PPPOE DELETE TRANSPORT
Syntax PPPOE DELETE TRANSPORT {<name>|<number>}
Description This command deletes a single PPPoE transport.
Options The following table gives the range of values for each option that can be specified with
this command and a default value for each option (if applicable).
Example --> pppoe delete transport pppoe1
See also PPPOE LIST TRANSPORTS
8.7.4.1.5 PPPOE LIST TRANSPORTS
Syntax PPPOE LIST TRANSPORTS
Description This command lists PPPoE transports that have been created using the pppoe add trans-
port command. It displays the following information about the transports:
• Transport identification number
• Transport name
• Name of port used
• Virtual circuit identifier (vci) used (pvc transports only)
• Virtual path identifier (vpi) used (pvc transports only)
Example Example--> pppoe list transports
PPPoE transports:
ID | Name | Port | Vci | Vpi
-----|------------|-----------|-----------|-----------
1 | p3 | realtek | N/A | N/A
2 | p2 | a1 | 800 | 0
3 | p1 | ethernet0 | N/A | N/A
------------------------------------------------------
Option Description Default Value
name An existing PPPoE transport. To display transport names, use
the PPPOE LIST TRANSPORTS command.
N/A
number An existing PPPoE transport. To display transport numbers,
use the PPPOE LIST TRANSPORTS command.
N/A