User guide

PPPoE PPPoE command reference

iMG/RG Software Reference Manual (ADSL Port)

8-72

Example --> pppoe add transport pppoe1 dialout pvc 1 a1 0 800

accessconcentrator server32 servicename mercury

See also PPPOE DELETE TRANSPORT

interface The PPP interface to a channel that transports PPPoE

data. The interface value must be the ID value of the IP

interface that will be attached to the PPPoE transport.

The IP ID value is reported by the command ip list

interfaces

N/A

port The system port that is used to transport ATM data. N/A

vpi A field in the ATM header. The VPI is used to identify

the virtual path that a circuit belongs to. The VPI can be

any value between 0 and 4095.

N/A

vci Part of the ATM header. The VCI is a tag that identifies

which channel a cell will travel over. The VCI can be

any value between 1 and 65535.

N/A

concentrator A PPPoE tag that identifies a remote access concentra-

tor (or PPPoE server). PPPoE will only connect to the

named access concentrator. If no concentrator tag is

set, PPPoE connects to the first access concentrator

that responds. It is your ISP that determines the tag

name/number.

N/A

service name A PPPoE tag that identifies a specific service that is

acceptable to the PPPoE client. If set, the PPPoE trans-

port will connect to the first access concentrator it

finds that uses this service. If an access concentrator is

also set, the PPPoE transport will connect to the speci-

fied service on the named concentrator. It is your ISP

that determines the service name.

N/A