User guide

Ethernet command reference Ethernet
8-61
iMG/RG Software Reference Manual (ADSL Port)
8.6.1.1.5 ETHERNET LIST TRANSPORTS
Syntax ETHERNET LIST TRANSPORTS
Description This command lists all Ethernet transports that have been created using the ETHERNET
ADD TRANSPORT command. It displays the transport identification number and name,
and the name of the port that it uses to transport Ethernet data.
Example --> ethernet list transports
Ethernet transports:
ID | Name | Port
-----|------------|------------
1 | default | ethernet0
2 | t1 | bunbridge
3 | vlan_2 | ethernet1
-------------------------------
See also ETHERNET LIST PORTS
8.6.1.1.6 ETHERNET SET TRANSPORT PORT
Syntax ETHERNET SET TRANSPORT {<name>|<number>} PORT <port>
Description This command sets the port that an existing Ethernet transport uses to transport Ether-
net data.
Options The following table gives the range of values for each option that can be specified with
this command and a default value (if applicable).
Example --> ethernet set transport eth1 port hdlc
See also ETHERNET ADD TRANSPORT
ETHERNET LIST TRANSPORTS
PORT LIST
Option Description Default Value
name An existing Ethernet transport. To display transport names,
use the ETHERNET LIST TRANSPORTS command.
N/A
number An existing Ethernet transport. To display transport num-
bers, use the
ETHERNET LIST TRANSPORTS com-
mand.
N/A
port The system port that is used to transport Ethernet data. The
same port cannot be used for more than one Ethernet trans-
port at a time.
Ethernet