User guide

Ethernet Ethernet command reference
iMG/RG Software Reference Manual (ADSL Port)
8-60
See also ETHERNET LIST TRANSPORTS
ETHERNET LIST PORTS
PORT LIST
8.6.1.1.2 ETHERNET CLEAR TRANSPORTS
Syntax ETHERNET CLEAR TRANSPORTS
Description This command deletes all Ethernet transports that were created using the ETHERNET
ADD TRANSPORT command.
Example --> ethernet clear transports
See also ETHERNET DELETE TRANSPORT
8.6.1.1.3 ETHERNET DELETE TRANSPORT
Syntax ETHERNET DELETE TRANSPORT {<name>|<number>}
Description This command deletes a single Ethernet transport.
Options The following table gives the range of values for each option that can be specified with
this command and a default value (if applicable).
Example --> ethernet delete transport eth1
See also ETHERNET LIST TRANSPORTS
8.6.1.1.4 ETHERNET LIST PORTS
Syntax ETHERNET LIST PORTS
Description This command lists the valid physical or virtual ports that can be used to transport
Ethernet data.
Example --> ethernet list ports
Valid ethernet port names:
ethernet1
bunbridge
Option Description Default Value
name An existing Ethernet transport. To display transport names,
use the ETHERNET LIST TRANSPORTS command.
N/A
number An existing Ethernet transport. To display transport num-
bers, use the
ETHERNET LIST TRANSPORTS com-
mand.
N/A