User guide

Ethernet command reference Ethernet
8-59
iMG/RG Software Reference Manual (ADSL Port)
8.6.1.1 Ethernet CLI commands
The table below lists the Ethernet commands provided by the CLI:
8.6.1.1.1 ETHERNET ADD TRANSPORT
Syntax ETHERNET ADD TRANSPORT <vlan_name | port>
Description This command adds a named Ethernet transport and specify on which VLAN the module
is listening for incoming frames or it is sending tagged frames.
Options The following table gives the range of values for each option that can be specified with
this command and a default value (if applicable).
Example --> ethernet add transport vlan_2
TABLE 8-5 Ethernet commands
Commands
Fiber
A
Fiber
B
Fiber
C
Fiber
D
Fiber
E
Modular
ADSL
A
ADSL
B
ADSL
C
ETHERNET ADD TRANSPORT XXX
ETHERNET CLEAR TRANSPORTS XXX
ETHERNET DELETE TRANSPORT XXX
ETHERNET LIST PORTS XXX
ETHERNET LIST TRANSPORTS XXX
ETHERNET SET TRANSPORT PORT XXX
ETHERNET SHOW TRANSPORT XXX
Option Description Default Value
port For ADSL B and ADSL C devices.
It is the name of the port that identifies the ether-
net transport class
ethernet0
vlan_name For ADSL A devices
The name of an existing vlan created with the
VLAN ADD command. To display the list of exist-
ing vlans, use the VLAN SHOW command.
N/A