User guide

Transports Transports command reference
iMG/RG Software Reference Manual (ADSL Port)
8-54
8.5.1.1.7 TRANSPORTS SET METER INSTANCE PROFILE
Syntax TRANSPORTS SET
{<name>|<number>} METER INSTANCE <meterid>
PROFILE <ProfileName>
Description This command sets a meter profile on a transport for a specific meter instance. The
meter instance matches a meter Id configured using the CLASSIFIER PROFILE SET
RULE METERID command. This creates an association between the classified stream
and the meter instance.
You can set multiple meter instances on an existing transport.
Options The following table gives the range of values for each option that can be specified with
this command and a default value for each option (if applicable).
Example --> transports set myrfc meter instance 1 mp1
See also TRANSPORTS LIST
TRANSPORTS SET METER INSTANCE DISABLED
QOS (chapter X-QOS)
CLASSIFIER PROFILE SET RULE METERID
METER LIST PROFILES
8.5.1.1.8 TRANSPORTS SET SCHEDULER PROFILE
Syntax TRANSPORTS SET
{<name>|<number>} SCHEDULER PROFILE <profile
name>
Description This command sets an existing scheduler profile on an existing transport. The outgoing
traffic on the transport will be scheduled according to the configuration of the scheduler
profile. Shaping and algorithmic dropping are also performed if configured in the sched-
uler profile.
Option Description Default Value
name An existing transport. To display transport names, use
the TRANSPORTS LIST command.
N/A
number An existing transport. To display transport numbers, use
the TRANSPORTS LIST command.
N/A
meterid A number that represents a meter instance. The meter
instance is set on a specific classifier profile using the
CLASSIFIER PROFILE SET RULE
METERID
command.
N/A
ProfileName An existing meter profile. To display profile names, use
the METER LIST PROFILES command.
N/A