User guide

Transports command reference Transports
8-53
iMG/RG Software Reference Manual (ADSL Port)
Example --> transports set myrfc classifier profile p1
See also TRANSPORTS SET CLASSIFIER DISABLED
TRANSPORTS LIST
QOS (chapter X-QOS)
CLASSIFIER ADD PROFILE
CLASSIFIER LIST PROFILES
8.5.1.1.6 TRANSPORTS SET METER INSTANCE DISABLED
Syntax TRANSPORTS SET {<name>|<number>} METER INSTANCE <meterid>
DISABLED
Description This command disables a meter instance previously set on a transport using the transport
set meter instance profile command.
Options The following table gives the range of values for each option that can be specified with
this command and a default value for each option (if applicable).
Example --> transports set myrfc meter instance 1 disabled
See also TRANSPORTS LIST
TRANSPORTS SET METER INSTANCE PROFILE
QOS (chapter X-QOS)
CLASSIFIER PROFILE SET RULE METERID
METER LIST PROFILES
profile name An existing profile. To display transport names,
use the classifier list profiles command.
N/A
profile number An existing profile. To display profile numbers, use
the classifier list profiles command.
N/A
Option Description Default Value
name An existing transport. To display transport names, use the
transports list command.
N/A
number An existing transport. To display transport numbers, use
the transports list command.
N/A
meterid A number that represents a meter instance. The meter
instance is set on a specific classifier profile using the clas-
sifier profile set rule meterid command.
N/A
Option Description Default Value