User guide

Transports Transports command reference
iMG/RG Software Reference Manual (ADSL Port)
8-52
8.5.1.1.4 TRANSPORTS SET CLASSIFIER DISABLED
Syntax TRANSPORTS SET {<name>|<number>} CLASSIFIER DISABLED
Description This command disables packet classification previously set on a specified transport using
the transports set classifier profile command. The classifier is removed from the data
path.
Options The following table gives the range of values for each option that can be specified with
this command and a default value for each option (if applicable).
Example --> transports set pvc_0_35 classifier disabled
See also TRANSPORTS SET CLASSIFIER PROFILE
TRANSPORTS LIST CLASSIFIER CLI COMMANDS
8.5.1.1.5 TRANSPORTS SET CLASSIFIER PROFILE
Syntax TRANSPORTS SET
{<name>|<number>} CLASSIFIER PROFILE {<profile
name>|<profile number>}
Description This command sets an existing classifier profile on an existing transport. All rules that
exist in this profile will test incoming packets on the specified transport.
The same profile can be added to more than one transport.
Options The following table gives the range of values for each option that can be specified with
this command and a default value for each option (if applicable).
Option Description Default Value
name An existing transport. To display transport names, use
the transports list command.
N/A
number An existing transport. To display transport numbers, use
the transports list command.
N/A
Option Description Default Value
name An existing transport. To display transport names,
use the transports list command.
N/A
number An existing transport. To display transport num-
bers, use the transports list command.
N/A