User guide

Emergency Emergency command reference
iMG/RG Software Reference Manual (System Configuration)
1-50
TABLE 1-3 Emergency CLI Commands
1.3.4.1.1 EMERGENCY ADD
Syntax
EMERGENCY ADD VLAN <vlan_vid> PORT <port_name> FRAME TAGGED
Description This command adds and tags an Ethernet port to the specified vlan. The vlan must be
already defined in the Emergency module using the EMERGENCY CREATE VLAN com-
mand.
Options The following table gives the range of values for each option that can be specified with
this command and a default value (if applicable).
Option Description Default Value
Example Example .. emergency add vlan 2 port lan4 frame tagged
See also EMERGENCY CREATE
EMERGENCY SHOW
EMERGENCY UPDATE
Option
Fiber
A
Fiber
B
Fiber
C
Fiber
D
Fiber
E Modular
ADSL
A
ADSL
B
ADSL
C
EMERGENCY ADD
EMERGENCY CREATE
EMERGENCY DELETE
EMERGENCY SET DHCP
EMERGENCY SET IPINTERFACE GATEWAY
EMERGENCY SET IPINTERFACE IPADDRESS
EMERGENCY SHOW
EMERGENCY UPDATE
Option Description Default Value
vlan_id The vlan identifier (VID) previously created with the
EMERGENCY CREATE VLAN command. To display
the existing vlan, use the EMERGENCY SHOW com-
mand.
N/A
port_name The name of an Ethernet port. Available values are:
lan1, lan2, lan3 and lan4.
N/A