User guide

Bridge Bridge command reference
iMG/RG Software Reference Manual (ADSL Port)
8-40
See also BRIDGE ATTACH
BRIDGE LIST INTERFACES
BRIDGE LIST VLAN
8.4.3.1.2 BRIDGE ADD VLANINTERFACE
Description BRIDGE ADD VLANINTERFACE {<name>|number} {tagged|untagged} <interfacename>
This command adds an interface in the egress interface list of the named VLAN. The
egress interface list for a VLAN is the union of tagged interfaces and the untagged inter-
faces. For the default VLAN, all the bridge interfaces, are automatically configured as its
untagged egress interfaces. The user need not explicitly add untagged interfaces for the
DefaultVlan.
Options The following table gives the range of values for each option that can be specified with
this command and a default value (if applicable).
Example --> bridge add vlainterface vlan666 tagged pvc_0_35_if
See also BRIDGE LIST VLAN
BRIDGE LIST INTERFACES
8.4.3.1.3 BRIDGE ATTACH
Syntax BRIDGE ATTACH {<name>|<number>} <transport>
Description This command attaches an existing transport to an existing bridge interface to allow data
to be bridged via the transport.
Only one transport can be attached to an interface. If you use this command when there
is already a transport attached to the interface; the new transport replaces the previous
one.
This command implicitly enables the transport being attached.
Option Description Default Value
name A name that identifies an existing VLAN. To display the list of
statically configured VLANs, use bridge list static vlans.
N/A
number A number that identifies an existing VLAN.
tagged To add a port in the tagged port list of the named VLAN.
untagged To add a port in the untagged port list of the named VLAN.