User guide

Bridge command reference Bridge
8-39
iMG/RG Software Reference Manual (ADSL Port)
8.4.3 Bridge command reference
8.4.3.1 Bridge CLI commands
This chapter describes the Bridge commands provided by the CLI:
8.4.3.1.1 BRIDGE ADD INTERFACE
Syntax BRIDGE ADD INTERFACE <name>
Description This command adds a named interface to the bridge.
Options The following table gives the range of values for each option that can be specified with
this command and a default value (if applicable).
Example --> bridge add interface pvc_1_32_if
TABLE 8-3 Bridge commands
Functions
Fiber
A
Fiber
B
Fiber
C
Fiber
D
Fiber
E
Modular
ADSL
A
ADSL
B
ADSL
C
BRIDGE ADD INTERFACE XXX
BRIDGE ADD VLANINTERFACE XX
BRIDGE ATTACH XXX
BRIDGE CLEAR INTERFACES XXX
BRIDGE DELETE INTERFACE XXX
BRIDGE DETACH XXX
BRIDGE LIST INTERFACES XXX
BRIDGE LIST VLANS XX
BRIDGE SET FILTERAGE XXX
BRIDGE SET INTERFACE FILTERTYPE XXX
BRIDGE SET INTERFACE PORTFILTER
BRIDGE SHOW XXX
BRIDGE SHOW INTERFACE XXX
Option Description Default Value
name An arbitrary name that identifies the interface. It can be
made up of one or more letters or a combination of letters
and digits, but it cannot start with a digit.
N/A