User guide

Port a1 Port a1 command reference
iMG/RG Software Reference Manual (ADSL Port)
8-34
rvbrPCR_CPS = 0
rvbrSCR_CPS = 0
vbrPCR_CPS = 0
vbrSCR_CPS = 0
ubr_CPS = 12000
RingLength = 1000
VPIRange = 12
VCIRange = 16
MaxVcs = 12
DefaultPCR = 2000
DefaultMaxQueue = 16
TrafficShaping = false
NiType = nni
SnmpIfIndex = 3
SnmpIfType = 37
SnmpVcListHead = 0x01066f3c
resetDefaults = false
portSnmpIfIndex = 3
portSnmpIfType = 37
See also PORT A1 SET
PORT A1 STATUS
8.3.1.1.4 PORT A1 STATUS
Syntax PORT A1 STATUS
Description This command displays basic connection parameters for ADSL port.
Some of the information reported are:
• The connection status (idle, training, showtime)
• The ADSL connection mode negotiated (G.DMT, T1.413, G.SPAN, ADSL2,
ADSL2+)
• The maximum negotiated uplink bit rate
• The maximum negotiated downlink bit rate
• The administrative port status (none, activate, abort)
• The administrative connection mode.
Example AT-iMG634A-R2 device port a1 status
--> port a1 status