User guide

Port a1 command reference Port a1
8-23
iMG/RG Software Reference Manual (ADSL Port)
StatusFailCount ONLY Annex A devices group ADSL A and group
ADSL C
0
TxAttenuation Group A and Group C devices
The user can specify transmit power attenuation.
Possible values are:
Dmt_0DB, Dmt_0.1DB, Dmt_0.2DB,
Dmt_0.3DB, Dmt_0.4DB, Dmt_0.5DB,
Dmt_0.6DB, Dmt_0.7DB, Dmt_0.8DB,
Dmt_0.9DB, Dmt_1DB, Dmt_2DB, Dmt_3DB,
Dmt_4DB, Dmt_5DB, Dmt_6DB, Dmt_7DB,
Dmt_8DB, Dmt_9DB, Dmt_10DB, Dmt_11DB,
Dmt_12DB, Bis_0DB, Bis_0.1DB, Bis_0.2DB,
Bis_0.3DB, Bis_0.4DB, Bis_0.5DB, Bis_0.6DB,
Bis_0.7DB, Bis_0.8DB, Bis_0.9DB
Bis_0DB
TxEndBin Group A and Group C devices
The highest bin number allowed for the transmit
signal can be selected. This allows the customer
to limit bins used for special configurations
63
TxStartBin Group A and Group C devices
The lowest bin number allowed for the transmit
signal can be selected. This allows the customer
to limit bins used for special configurations.
6 annexA
33 AnnexB
UtopiaInterface It specifies the Utopia interface type
Possible values are:
Level1, Level2
Level1
Whip Parameter to configure the WHIP mode to TCP
or Serial
Possible values are:
Disable, TCP
Disable
TABLE 8-2 Options for ADSL Port Attributes (Continued)
Option Description Default Value