User guide

Port a1 Port a1 command reference
iMG/RG Software Reference Manual (ADSL Port)
8-22
SRA Group A and Group C devices
Enables/Disables the Downstream SRA feature
on Bis/Bis+
Possible values are:
Disable, Enable
Disable
ShowtimeLed To specify which
LED is to be used to
display State.
Possible values are:
0, 1, 2, 3, 4, None
0
Standard This parameter selects the preferred standard
compliance.
ADSL StandardCompliance to either T1.413,
G992.1 (G.dmt), or G992.2 (G.lite)
Multimodewhere one unit detects the other end
as T1.413, G.lite, G.dmt, G.SPAN.
G.SpanThe following option is to enable High
Speed ADSL DMT applications
ADSL2The following option allows the CPE to
automatically connect in either ADSL Annex A or
ADSL2 mode, depending upon the standard sup-
port of the CO.
ADSL2plusThe following option allows the CPE
to automatically connect in eitherADSL Annex A,
ADSL2 or ADSL2plus mode, depending upon the
standard support of the CO.
Possible values for AnnexA are:
G.Dmt, Bis, BisPlusAuto, BisPlusOnly, G.Span,
G.Span+, G.Span++, t1.413, g.lite, Multimode,
ALCTL_14, ALCATEL_T1413_B, ALCTL, ADI,
G.Dmt.Bis, G.Dmt.BisPlusAuto, G.Dmt.BisPlu-
sOnly.
Possible values for AnnexB are:
G.Dmt, Bis, BisPlusAuto, BisPlusOnly, G.Span,
G.Span+, G.Span++, t1.413, g.lite, Multimode,
ALCTL_14, ALCATEL_T1413_B, ALCTL, ADI
BisPlusAuto
TABLE 8-2 Options for ADSL Port Attributes (Continued)
Option Description Default Value