User guide

Port a1 command reference Port a1
8-19
iMG/RG Software Reference Manual (ADSL Port)
FramerType Group A and Group C devices
There are two types of framing defined per
T1.413: full overhead and reduced overhead. Each
type has 2 versions thus resulting in four framing
structures referred to as 0, 1, 2, and 3. These
framing structures are described in Table 4 of
T1.413. Framing type 3 should be used for single
latency applications. When using dual latency,
framing type 2 should be selected.
Possible values are:
Type0, Type1, Type2, Type3,Type3ET for Data
boost
Type3ET
GenericTrace ONLY Group B devices
Configure the GenX trace( SAS/DSP).
Possible values are:
Disable, EnableAll, DSP, SAS
DSP
HappyMode Group A and Group C devices
Possible values are:
Disable, Enable
Enable
HostControl Enable/Disable Flag to control host.
Possible values are:
Disable, Enable
Enable
LoopbackTest ONLY Group B devices
Parameter to set and test the Loopback assigned.
Possible values are:
DAC/ADC Lpbk MTS, TX/RX Baseline MTS,
Hybrid Resp Lpbk MTS, TX Filter Lpbk MTS, RX
Filter Lpbk MTS, MTPR Lpbk MTS, Quiet Line PSD
MTS
MaxBitsPerBin Group A and Group C devices
Set the maximum number of receive bits per bin
can be selected.
Possible values are:
0 to 15
15
TABLE 8-2 Options for ADSL Port Attributes (Continued)
Option Description Default Value