User guide

Port a1 Port a1 command reference
iMG/RG Software Reference Manual (ADSL Port)
8-18
Defaults Group B devices:
Option to assign defaults to all the parameters.
Possible values are:
None, All
Group A and C devices:
Set default parameters based on the standard
selected.
Possible values are:
None, ADSL2, ADSL2PlusAuto, ADSL2PlusOnly,
AnnexA, AnnexM2,
AnnexM2PlusAutoAnnexM2PlusOnly, AnnexB,
AnnexB2, AnnexB2PlusAuto, AnnexB2PlusOnly
None
DetectNoise Enables and Disables Detect Noise Disable
DyingGasp Enable or Disable the DyingGasp support Disable
EcFdmMode Group A and Group C devices
Depending upon which mode is required by your
service provider, overlap of bins (Echo Cancella-
tion) may be selected by the value EC. Likewise, if
you should deploy no overlap (Frequency Divi-
sion Multiplexing) the value FDM may be
selected.
Possible values are:
EC,FDM
FDM
FastRetrain Group A and Group C devices
Configures Fast Retrain on the Line for AnnexA/
B.
Possible values are:
Enable, Disable
Disable
TABLE 8-2 Options for ADSL Port Attributes (Continued)
Option Description Default Value