User guide

Port a1 command reference Port a1
8-17
iMG/RG Software Reference Manual (ADSL Port)
Capability Group A and Group C devices
This parameter controls if the CPE will attempt
to startup using alternate standards, dependent
upon CO capability.
Possible values are for AnnexA:
GDMT, BIS, BIS+, BIS+/GDMT, BIS+/T1413, BIS+/
BIS, BIS+/BIS/T1413, BIS+/BIS/GDMT, A-ALL,
MBIS, MBIS+, MBIS+/MBIS, MA-ALL, BIS+/BIS/A/
MULTIMODE, Disable.
Possible values are for AnnexB:
BIS+/BIS/B, Disable
MA-ALL (AnnexA)
ClockType Configures the Clock
Type to Crystal/Oscillator
Crystal
CodeType Group A and Group C devices
CodingGain Group A and Group C devices
Coding gain is the reduction in transmit power
realized by implementing trellis/RS coding tech-
niques. Automatic coding gain selection is recom-
mended for automatic bit allocation depending
upon line conditions. Otherwise, requested cod-
ing gain is selectable from 0 dB to 7 dB in 1 dB
increments.
N/A
CabinetMode Group A and Group C devices
DSPTrace ONLY Group B devices
This option allows to start logging of the DSP
Trace to a file.
Possible values are:
StopLogging, StartLogging
StopLogging
TABLE 8-2 Options for ADSL Port Attributes (Continued)
Option Description Default Value