User guide

Port a1 Port a1 command reference
iMG/RG Software Reference Manual (ADSL Port)
8-14
BisAMaxMargin
BisBMaxMargin
BisMMaxMargin
ONLY Group B devices
Configures Maximum SNR Margin for Bis/Bis+
Possible values are:
PerCO, Disable
PerCO
BisAMaxSInverse
BisBMaxSInverse
BisMMaxSInverse
ONLY Group B devices
Limits the number of Code words in a DMT Sym-
bol,
configured for Bis/Bis+
Possible values are:
0x02, 0x03, 0x04, 0x05, 0x06,0x07, 0x08, 0x09,
0x0A,0x0B, 0x0C, 0x0D, 0x0E,0x0F, 0x10
0x10
BisANTRMode
BisBNTRMode
BisMNTRMode
ONLY Group B devices
Possible values are:
Disable, Enable
Disable
BisAPSDMask
BisBPSDMask
BisMPSDMask
ONLY Group B devices
PSD Mask for Bis/Bis+
Possible values are:
Standard, NonOvlp-M1,NonOvlp-M2, NonOvlp-
M1M2,NonOvlp-Flat, ALL
NonOvlp-M1
(BisA/B)
ALL (BisM)
BisAPrecedence
BisBPrecedence
BisMPrecedence
ONLY Group B devices
Sets the Precedence to DSInp/RSDelay for Bis/
Bis+.
DSInp: This setting will maximize the rates, i.e.
during calculation the delay is minimized to
achieve better rates.
RSDelay: This setting gives precedence to the
delay value, i.e. it will result in a relatively larger
delay as compared to the above setting, thus
resulting in a slightly better INP value and may be
slightly lowerrates.
Possible values are:
DSInp, RSDelay
DSInp
TABLE 8-2 Options for ADSL Port Attributes (Continued)
Option Description Default Value