User guide

Port a1 command reference Port a1
8-13
iMG/RG Software Reference Manual (ADSL Port)
BisAFramerType
BisBFramerType
BisMFramerType
ONLY Group B devices
Configures the Framer Type for Bis/Bis+.
There are five different types of framing struc-
tures:
Type0: Full overhead framing with asynchronous
bit-to-modem timing.
Type1: Full overhead framing with synchronous
bit-to-modem timing.
Type2: Reduced overhead framing with separate
fast and sync byte in fast and interleaved latency
buffer respectively.
Type3: Reduced overhead framing with merged
fast and sync byte, using either the fast or the
interleaved latency buffer.
Type3ET: It refers to Databoost (CNXT propri-
etary, b/w CNXT CO & CNXT CPE) enabled on
top
of framing mode - 3.
Possible values are:
Type0, Type1, Type2, Type3,Type3ET
Type3ET
BisAMaxBitsPerBin
BisBMaxBitsPerBin
BisMMaxBitsPerBin
ONLY Group B devices
Configures Maximum Bit per Bin for Bis/Bis+
15
BisAMaxDownRate
BisBMaxDownRate
BisMMaxDownRate
ONLY Group B devices
Configures the Maximum Down Rate for Bis/Bis+
511
BisAMaxInterleaveD
BisBMaxInterleaveD
BisMMaxInter-
leaveD
ONLY Group B devices
Sets the Max interleaved Depth for Bis/Bis+.
Possible values are:
64, 128, 256, 512
511
TABLE 8-2 Options for ADSL Port Attributes (Continued)
Option Description Default Value