User guide

Port a1 Port a1 command reference
iMG/RG Software Reference Manual (ADSL Port)
8-10
AnnexAQualifica-
tionMode
AnnexBQualifica-
tionMode
ONLY Group B devices
Configures Qualification mode for AnnexA/B.
This parameter is mainly used for Qualifications
and internal test/debugging.
Possible values are:
Mode0, Mode1, Mode2,Mode3, Mode4, Mode5
mode1
AnnexARxAutoBin-
Adjust
AnnexBRxAutoBin-
Adjust
ONLY Group B devices
Possible values are:
Enable, Disable
Disable
AnnexARxEndBin
AnnexBRxEndBin
ONLY Group B devices
Configures Rx End Bin for AnnexA/B
Possible values are:
255
AnnexARxStartBin
AnnexBRxStartBin
ONLY Group B devices
Configures Rx StartBin for AnnexA/B
32 (AnnexA)
64 (AnnexB)
AnnexAStandard
AnnexBStandard
ONLY Group B devices
No longer considered.
AnnexATxAttenua-
tion
AnnexBTxAttenua-
tion
ONLY Group B devices
Configures Tx Attenuation for AnnexA/B
0
AnnexATxEndBin
AnnexBTxEndBin
ONLY Group B devices
Configures Tx End Bin for AnnexA/B
31 (AnnexA)
63 (AnnexB)
AnnexATxStartBin
AnnexBTxStartBin
ONLY Group B devices
Configures Tx StartBin for AnnexA/B
6 (AnnexA)
33 (AnnexB)
AutoSRA Group A, B and C devices ONLY AnnexB
Possible values are:
Enable, Disable
Disable
AutoSRADnShiftPe-
riod
Group A and group C devices ONLY AnnexB
AutoSRAMaxTime-
CRC
Group A and group C devices ONLY AnnexB
TABLE 8-2 Options for ADSL Port Attributes (Continued)
Option Description Default Value