User guide

Port a1 command reference Port a1
8-9
iMG/RG Software Reference Manual (ADSL Port)
AnnexAFramerType
AnnexBFramerType
ONLY Group B devices
Configures the Framer Type for AnnexA/B. There
are five different types of framing structures:
Type0: Full overhead framing with asynchronous
bit-to-modem timing.
Type1: Full overhead framing with synchronous
bit-to-modem timing.
Type2: Reduced overhead framing with separate
fast and sync byte in fast and interleaved latency
buffer respectively.
Type3: Reduced overhead framing with merged
fast and sync byte, using either the fast or the
interleaved latency buffer.
Type3ET: It refers to Databoost(CNXT propri-
etary, b/w CNXT CO & CNXT CPE) enabled on
top
Possible values are:
Type0, Type1, Type2, Type3, Type3ET
Type3
AnnexAMax-
BitsPerBin
AnnexBMax-
BitsPerBin
ONLY Group B devices
Configures Maximum Bits per Bin for AnnexA/B
Possible values are:
[0, 15]
15
AnnexAMaxDown-
Rate
AnnexBMaxDown-
Rate
ONLY Group B devices
Configures the Maximum Down Rate for
AnnexA/B
255 (AnnexA)
4095 (AnnexB)
AnnexAMaxMargin
AnnexBMaxMargin
ONLY Group B devices
Configures Maximum SNR Margin for AnnexA/B
Possible values are:
PerCO, Disable
PerCO
AnnexANTRMode
AnnexBNTRMode
ONLY Group B devices
Possible values are:
Enable, Disable
Disable
TABLE 8-2 Options for ADSL Port Attributes (Continued)
Option Description Default Value