User guide

Port a1 Port a1 command reference
iMG/RG Software Reference Manual (ADSL Port)
8-6
Options The following table gives the range of values for each option <port class> that can be
specified with this command and a default value (if applicable).
Example --> port list ?
See also all Port class
atm Port class
ethernet Port class
vca Port class
Example --> port list atm
Valid port names in class 'atm':
a1
See also PORT A1 SET
PORT A1 SHOW
PORT A1 STATUS
8.3.1.1.2 PORT A1 SET
Syntax PORT A1 SET <option> <value>
Description This command allows you to modify attributes on the ADSL port. Any modifications
override existing attribute values specified in the device. Typically it’s necessary to save
the changes with the SYSTEM CONFIG CREATE command and restart the Allied
Telesis Media Gateway in order to activate the changes.
Option Description Default Value
all all port classes available, classes meaning a grouping of
software device driver to manage different media type
of protocols, i.s. atm for ADSL ethernet for 802.1x
frames or wireless for wireless connection
N/A
atm class which contains port a1, software device driver
elected to manage ATM cells.
N/A
ethernet class which contain any port that manages 802.x frames N/A
802_1x for wireless devices this class contain the port to man-
age wireless frames on Bridge layer
N/A
802_11 for wireless devices this class contain the port to man-
age wireless frames on switch layer
vca not supported N/A