User guide

Port a1 command reference Port a1
8-5
iMG/RG Software Reference Manual (ADSL Port)
-->pppoa set transport trpppoa password <password>
-->pppoa set transport trpppoa welogin auto
-->pppoa set transport trpppoa headers llc enabled
-->pppoa set transport trpppoa enable
See also rfc1483 (chapter 7-ADSL Port)
pppoa (chapter 7-ADSL Port)
ip (chapter 2-Layer 2 functions)
8.3 Port a1
The following chapter describes all the ADSL port available parameters. Note the ADSL port is physically iden-
tified in the system with the name a1.
Under the Port command section it’s also possible display other ports (ethernet0, bunbridge, tel1 tel2, etc).
Some of these ports are real physical ports while others are virtual ports used by software modules as logical
ports.
Only ADSL a1 port is described in this section.
8.3.1 Port a1 command reference
8.3.1.1 Port a1 CLI commands
This chapter describes the Port a1 commands provided by the CLI:
8.3.1.1.1 PORT LIST
Syntax PORT LIST ? | <port class>
Description The PORT LIST ? command lists all possible types of port and their port classes. THE
PORT LIST <port class> command allows you to display the port names that belong to
a specific class.
TABLE 8-1 Port a1 Commands
Functions
Fiber
A
Fiber
B
Fiber
C
Fiber
D
Fiber
E
Modular
ADSL
A
ADSL
B
ADSL
C
PORT LIST XXX
PORT A1 SET XXX
PORT A1 SHOW XXX
PORT A1 STATUS XXX