User guide

L2Filter Command Reference L2Filter
7-67
iMG/RG Software Reference Manual (Quality of Service)
7.2.2.1.13 L2FILTER SHOW PROFILE
Syntax L2FILTER SHOW PROFILE <name>
Description This command displays information about the specified profile. This information includes
which rules the profile will attempt to match.
Options The following table gives the range of values for each option that can be specified with
this command and a default value (if applicable).
Example --> l2filter show profile TestProfile
See also L2FILTER ADD PROFILE
L2FILTER DELETE PROFILE
7.2.2.1.14 L2FILTER SHOW RULE
Syntax L2FILTER SHOW RULE <name>
Description This command displays information about the specified rule. This information includes the
rule’s ordering and its enabled state.
Options The following table gives the range of values for each option that can be specified with
this command and a default value (if applicable).
Example --> l2filter show rule TestRule
See also L2FILTER ADD RULE
L2FILTER DELETE RULE
7.2.2.1.15 L2FILTER SHOW FIELDTYPE
Syntax L2FILTER SHOW FIELDTYPE <name>
Description This command displays information about the specified field type. This information
includes the base, offset and mask values.
Option Description Default Value
name The name of the field to display n/a
Option Description Default Value
name The name of the rule to display n/a