User guide

Meter command reference QOS
7-57
iMG/RG Software Reference Manual (Quality of Service)
Example --> scheduler profile prioschlr set queue 1 ald profile ald1
--> scheduler profile prioschlr set queue 1 ald profile ald1 ald2 ald3
See also SCHEDULER LIST PROFILES
SCHEDULER PROFILE SET QUEUE WEIGHT
METER SET PROFILE ACTION DROP
7.1.6.2.8 SCHEDULER PROFILE SET QUEUE ALD DISABLED
Syntax SCHEDULER PROFILE <name> SET QUEUE {DEFAULT | [1-7]} ALD DIS-
ABLED
Description This command disables the Algorithmic Dropper (ALD) on a specified scheduler profile
queue.
Options The following table gives the range of values for each option that can be specified with
this command and a default value for each option (if applicable).
1-7 The scheduling priority value or queue ID value (cre-
ated using the
SCHEDULER PROFILE SET
QUEUE WEIGHT
command) that you want to
associate the ALD profile with. This can be any num-
ber between 1 and 7 (included).
N/A
GreenProfile An existing ALD profile. This is the only profile
required if the RED algorithm is used. If you are using
the WRED algorithm, this ALD profile is applied to
packets with green drop priority. To display ALD pro-
files, use the
ALD LIST PROFILES command.
N/A
YellowProfile An existing ALD profile. If you are using the WRED
algorithm, this ALD profile is applied to packets with
yellow drop priority. To display ALD profiles, use the
ALD LIST PROFILES command.
N/A
RedProfile An existing ALD profile. If you are using the WRED
algorithm, this ALD profile is applied to packets with
red drop priority. To display ALD profiles, use the
ALD LIST PROFILES command.
N/A
Option Description Default Value