User guide

Webserver command reference Webserver
1-43
iMG/RG Software Reference Manual (System Configuration)
Example --> webserver set port 1080
1.2.3.1.11 WEBSERVER SET TELNETPORT
Syntax WEBSERVER SET TELNETPORT <PORT>
Description This command sets the telnet port number that the Web Server process will use to
answer telent connection requests.
Options The following table gives the range of values for each option that can be specified with
this command and a default value (if applicable).
Example --> webserver set port 24
1.2.3.1.12 WEBSERVER SET SECCLASSES
Syntax WEBSERVER SET SECCLASSES <SECCLASSES>
Description This command allows you to set the security class(es) associated with the HTTP AppSer-
vice. Entering this command will overwrite any existing security class(es) configured for
the HTTP AppService. This has the same effect as entering the command ip set appser-
vice http secclasses <secclasses>.
Options The following table gives the range of values for each option that can be specified with
this command and a default value (if applicable).
Option Description Default Value
PORT A valid port number that must be between 0 and 65535. 23