User guide

QOS Meter command reference
iMG/RG Software Reference Manual (Quality of Service)
7-50
Example --> meter set profile mp1 green action pass
See also METER LIST PROFILES
7.1.6.1.10 METER SHOW PROFILE
Syntax METER SHOW PROFILE <name>
Description This command displays information about a meter profile that was created using one of
the METER ADD PROFILE commands. It displays the following information about the
specified profile:
•Name
• Type of algorithm used
• CIR value (in kbps)
•CBS value (in bytes)
• EBS value (for algorithm type srtcm only)
• PIR value (for algorithm type trtcm only)
• PBS value (for algorithm type trtcm only)
• Green action
• Yellow action (for algorithm types trtcm and srtcm only)
•Red action
Options The following table gives the range of values for each option that can be specified with
this command and a default value (if applicable).
Example --> meter show profile mp3
red Sets packets with red (out of profile) metering results to
pass.
drop
yellow Sets packets with yellow (partially in profile) metering results
to pass.
pass
Option Description Default Value
name An existing profile. To display names, use the
METER LIST PROFILES command.
N/A
Option Description Default Value