User guide

QOS Meter command reference
iMG/RG Software Reference Manual (Quality of Service)
7-46
Example --> meter add profile mp1 trtcm 80 10000 120 15000
See also METER ADD PROFILE SRTCM
METER ADD PROFILE TOKENBUCKET
METER LIST PROFILES
7.1.6.1.4 METER CLEAR PROFILES
Syntax METER CLEAR PROFILES
Description This command allows you to delete all meter profiles that were previously created using
the meter add profile commands.
Note that this command does not delete the profiles that are associated with meter
instances created using the TRANSPORTS SET METER INSTANCE PROFILE com-
mand.
Example --> meter clear profiles
See also METER ADD PROFILE SRTCM
METER ADD PROFILE TOKENBUCKET
METER ADD PROFILE TRTCM
7.1.6.1.5 METER DELETE PROFILE
Syntax METER DELETE PROFILE <name>
Description This command deletes a single meter profile that was previously created using one of the
meter add profile commands.
Note: Note that this command does not delete the profiles that are associated with meter instances created
using the
TRANSPORTS SET METER INSTANCE PROFILE command.
Options The following table gives the range of values for each option that can be specified with
this command and a default value (if applicable).
cir
Committed Information Rate in kbps.
N/A
cbs
Committed Burst Size in bytes.
N/A
pir
Peak Information Rate in kbps.
N/A
pbs
Peak Burst Size in bytes.
N/A
Option Description Default Value