User guide

QOS Meter command reference
iMG/RG Software Reference Manual (Quality of Service)
7-42
Options The following table gives the range of values for each option that can be specified with
this command and a default value for each option (if applicable)
Example --> classifier show profile pr1
C
lassifier profile: pr1
ID | Name | Test details
----|-----------------------------------------------------
1 | r1 | Set QOSC 1 Mark DSCP none
| | Src Addr 1.1.1.1 Src Mask 255.255.255.0
| | Dst Addr 2.2.2.2 Dst Mask 255.255.255.255
| | DSCP any Protocol UDP
| | Src Port 2727-2727 Dst Port 0 - 0
----------------------------------------------------------
See also CLASSIFIER LIST PROFILES
CLASSIFIER PROFILE LIST RULES
CLASSIFIER PROFILE SET RULE PROTOCOL
7.1.6 Meter command reference
7.1.6.1 Meter CLI commands
The table below lists the meter commands provided by the CLI:
Option Description Default Value
name An existing profile. To display profile names, use
the
CLASSIFIER LIST PROFILES
command.
N/A
number An existing profile. To display profile numbers,
use the
CLASSIFIER LIST PROFILES
command.
N/A
TABLE 7-2 Meter commands
Commands
Fiber
A
Fiber
B
Fiber
C
Fiber
D
Fiber
E
Modular
ADSL
A
ADSL
B
ADSL
C
METER ADD PROFILE SRTCM XXXXX X X X X
METER ADD PROFILE TOKENBUCKET XXXXX X X XX