User guide

Classifier command reference QOS
7-41
iMG/RG Software Reference Manual (Quality of Service)
Example --> classifier profile pr1 set rule r1 vlanpri 2
See also CLASSIFIER LIST PROFILES
CLASSIFIER PROFILE LIST RULES
7.1.5.1.29 CLASSIFIER SHOW PROFILE
Syntax CLASSIFIER SHOW PROFILE {<name>|<number>}
Description This command displays the following information about the rules previously added to an
existing profile:
• Rule ID number
• Rule name
• Test details; each packet is tested against the following configurable fields:
• The source IP address and netmask
• The destination IP address and netmask
• The Differentiated Services Code Point (DSCP)
• The protocol name or number
• The source port range
• The destination port range
If a packet matches the configured fields, the packet is assigned a specific QoSC. If a DSCP
is specified by the classifier profile set rule mark command, a DSCP is also assigned. The
assigned fields are also displayed in the Test details column.
Option Description Default Value
profilename A name that identifies an existing profile. To
display profile names, use the classifier list
profiles command.
N/A
rule name A name that identifies an existing rule. To
display rule names, use the classifier profile
list rules command.
N/A
vlanpri The vlan priority to be matched , valid values 0 to 7 N/A