User guide

Classifier command reference QOS
7-39
iMG/RG Software Reference Manual (Quality of Service)
Example --> classifier profile pr1 set rule r1 tos 0x04
See also CLASSIFIER LIST PROFILES
CLASSIFIER PROFILE LIST RULES
CLASSIFIER PROFILE SET RULE DSCP
7.1.5.1.26 CLASSIFIER PROFILE SET RULE TRAFFICTYPE
Syntax CLASSIFIER PROFILE <name> SET RULE <rule_name> TRAFFICTYPE
<type>
Description The purpose of this command is to match the rule based on the traffic type specified in
the ethernet header.
Options The following table gives the range of values for each option that can be specified with
this command and a default value for each option (if applicable).
Example --> classifier profile TestProfile set rule TestRule traffictype 0x800
See also CLASSIFIER LIST PROFILES
CLASSIFIER PROFILE LIST RULES
rule name
An existing rule. To display rule names, use the
CLASSI-
FIER PROFILE LIST RULES
command.
N/A
rule number
An existing rule. To display rule numbers, use the
CLAS-
SIFIER PROFILE LIST RULES
command.
N/A
tos
The
Type of Service, specified as a hexadecimal (0xNN)
in the range 0x00 and 0xfc. The 2 least significant bits are
ignored. Set to ‘any’ to cancel the ToS setting.
any
Option Description Default Value
name The name of the profile in which to alter the rule N/A
rule name The name of the rule in the profile to alter N/A
type The value of the traffic type on which to match the rule. N/A
Option Description Default Value