User guide

QOS Classifier command reference
iMG/RG Software Reference Manual (Quality of Service)
7-38
Example --> classifier profile pr1 set rule r1 srcport 2727 2727
See also CLASSIFIER LIST PROFILES
CLASSIFIER PROFILE LIST RULES
CLASSIFIER PROFILE SET RULE PROTOCOL
7.1.5.1.25 CLASSIFIER PROFILE SET RULE TOS
Syntax CLASSIFIER PROFILE {<name>|<number>} SET RULE {<rule
name>|<rule number>} TOS <tos>
Description This command configures a classifier rule to test the Type of Service (ToS) field in the IP
header of incoming packets.
The ToS field is also known as the DSCP field. See also the CLASSIFIER PROFILE
SET RULE DSCP command that provides an alternative method of testing the same IP
header field.
Options The following table gives the range of values for each option that can be specified with
this command and a default value for each option (if applicable).
number An existing profile. To display profile numbers, use the
CLASSIFIER LIST PROFILES command.
N/A
rule name
An existing rule. To display rule names, use the
CLASSI-
FIER PROFILE LIST RULES
command.
N/A
rule number
An existing rule. To display rule numbers, use the
CLAS-
SIFIER PROFILE LIST RULES
command.
N/A
min The start of the source port range for a TCP or UDP pro-
tocol.
0
max The end of the source port range for a TCP or UDP pro-
tocol.
0
Option Description Default Value
name An existing profile. To display profile names, use the
CLASSIFIER LIST PROFILES command.
N/A
number An existing profile. To display profile numbers, use the
CLASSIFIER LIST PROFILES command.
N/A
Option Description Default Value