User guide

QOS Classifier command reference
iMG/RG Software Reference Manual (Quality of Service)
7-34
Example --> classifier profile pr1 set rule r1 phyport 1
See also CLASSIFIER LIST PROFILES
CLASSIFIER PROFILE LIST RULES
7.1.5.1.21 CLASSIFIER PROFILE SET RULE PRIORITY
Syntax CLASSIFIER PROFILE {<name>|<number>} SET RULE {<rule
name>|<rule number>} PRIORITY <priority>
Description This command determines what happens if a rule is matched. You can configure the clas-
sifier to assign a priority to the packet matching a rule. The priority is mapped to a
scheduling priority value or queue ID (configured using the SCHEDULER PROFILE
SET QUEUE WEIGHT command) in order for the scheduler to identify different prior-
ity streams and provide appropriate scheduling behavior.
Multiple traffic streams may map to the same scheduling priority.
Options The following table gives the range of values for each option that can be specified with
this command and a default value for each option (if applicable).
Option Description Default Value
name A name that identifies an existing profile. To
display profile names, use the classifier list
profiles command.
N/A
number A number that identifies an existing profile.
To display profile numbers, use the classifier
list profiles command.
N/A
rule name A name that identifies an existing rule. To
display rule names, use the classifier profile
list rules command.
N/A
portnum A physical port number which must be a
positive, non-zero integer.
N/A