User guide

Webserver command reference Webserver
1-41
iMG/RG Software Reference Manual (System Configuration)
Description This command delete all the active management subnets
Example --> webserver clear managementsubnet
See also WEBSERVER LIST MANAGEMENTSUBNET
1.2.3.1.5 WEBSERVER DELETE MANAGEMENTSUBNET
Syntax WEBSERVER DELETE MANAGEMENTSUBNET <NAME>
Description This command delete a specific management subnet
Example --> webserver delete managementsubnet fortelent
See also WEBSERVER LIST MANAGEMENTSUBNET
1.2.3.1.6 WEBSERVER CLEAR STATS
Syntax WEBSERVER CLEAR STATS
Description This command delete all the statistics related to any management subnet
Example --> webserver clear stats
See also WEBSERVER LIST MANAGEMENTSUBNET
1.2.3.1.7 WEBSERVER SET MANAGEMENTIP
Syntax WEBSERVER SET MANAGEMENTIP <IPADDRESS>
Description This command allows connection requests to be restricted to only one IP address, (e.g.
from an IP address that is used by a management entity) or from any IP address (by set-
ting the IP address to 0.0.0.0).
This command has been superseded by webserver add managementsubnets command
that extends configuration flexibility.
Example --> webserver set managementip 192.168.1.10
See also WEBSERVER ADD MANAGEMENTSUBNETS
1.2.3.1.8 WEBSERVER SET INTERFACE
Syntax WEBSERVER SET INTERFACE <INTERFACE>
Description This command specifies the name of an IP interface that an ISOS IGD (Internet Gateway
Device) will use for UPnP (Universal Plug and Play) communication with other devices on
the local area network. By default, your system creates an IP interface with an Ethernet
transport attached to it. This interface is called iplan, and it is the default interface that
UPnP uses for its communication. Once you have set the UPnP interface, the IGD moni-