User guide

QOS Classifier command reference
iMG/RG Software Reference Manual (Quality of Service)
7-28
Example --> classifier profile pr1 set rule r1 dstport 2727 2727
See also CLASSIFIER LIST PROFILES
CLASSIFIER PROFILE LIST RULES
CLASSIFIER PROFILE SET RULE PROTOCOL
7.1.5.1.14 CLASSIFIER PROFILE SET RULE IFDOMAIN
Syntax CLASSIFIER PROFILE <name> SET RULE <rule_name> IFDOMAIN
<ifdomain> ACTION <action>
Description The purpose of this command is to create a rule that matches the interface domain of
the incoming packet.
Options The following table gives the range of values for each option that can be specified with
this command and a default value for each option (if applicable).
Option Description Default Value
name An existing profile. To display profile names, use the
CLASSIFIER LIST PROFILES command.
N/A
number An existing profile. To display profile numbers, use
the
CLASSIFIER LIST PROFILES com-
mand.
N/A
rule name An existing rule. To display rule names, use the
CLASSIFIER PROFILE LIST RULES com-
mand.
N/A
rule number An existing rule. To display rule numbers, use the
CLASSIFIER PROFILE LIST RULES com-
mand.
N/A
min The start of the destination port range for a TCP or
UDP protocol.
0
max The end of the destination port range for a TCP or
UDP protocol.
0
Option Description Default Value
name The name of the profile under which the rule exists N/A
rule_name The name of the rule in the profile to alter. N/A