User guide

QOS Classifier command reference
iMG/RG Software Reference Manual (Quality of Service)
7-26
Example --> classifier profile pr1 set rule r1 dscp 101110
See also CLASSIFIER LIST PROFILES
CLASSIFIER PROFILE LIST RULES
CLASSIFIER PROFILE SET RULE TOS
7.1.5.1.12 CLASSIFIER PROFILE SET RULE DSTADDR
Syntax CLASSIFIER PROFILE {<name>|<number>} SET RULE {<rule
name>|<rule number>} DSTADDR <addr> <mask>
Description This command configures a classifier rule to test the destination IP address of incoming
packets. The netmask address is compulsory and allows you to match either a whole
subnet or just one host using the mask 255.255.255.255.
Set the DSTADDR values to 0.0.0.0 if you want to cancel this test and set the rule to
match any destination IP address.
Options The following table gives the range of values for each option that can be specified with
this command and a default value for each option (if applicable).
Option Description Default Value
name An existing profile. To display profile names, use the
CLASSIFIER LIST PROFILES command.
N/A
number An existing profile. To display profile numbers, use the
CLASSIFIER LIST PROFILES command.
N/A
rule name
An existing rule. To display rule names, use the CLASSI-
FIER PROFILE LIST RULES
command.
N/A
rule number
An existing rule. To display rule numbers, use the
CLAS-
SIFIER PROFILE LIST RULES
command.
N/A
dscp
The
Differentiated Service Code Point (DSCP). This
value is specified as 6 binary digits (NNNNNN). Set to any
to cancel the DSCP setting.
any
Option Description Default Value
name An existing profile. To display profile names, use the
CLASSIFIER LIST PROFILES command.
N/A