User guide

Classifier command reference QOS
7-25
iMG/RG Software Reference Manual (Quality of Service)
Example --> classifier profile pr1 set rule r1 droppri 0
See also CLASSIFIER LIST PROFILES
CLASSIFIER PROFILE LIST RULES
7.1.5.1.11 CLASSIFIER PROFILE SET RULE DSCP
Syntax CLASSIFIER PROFILE {<name>|<number>} SET RULE {<rule
name>|<rule number>} DSCP <dscp>
Description This command configures a classifier rule to test the Differentiated Services Code Point
(DSCP) field in the IP header of incoming packets.
The DSCP field is also known as the Type of Service (TOS) field. See the CLASSIFIER
PROFILE SET RULE TOS command, which provides an alternative method of testing
the same IP header field.
Options The following table gives the range of values for each option that can be specified with
this command and a default value for each option (if applicable)
Option Description Default Value
name An existing profile. To display profile names, use the
CLASSIFIER LIST PROFILES command.
N/A
number An existing profile. To display profile numbers, use the
CLASSIFIER LIST PROFILES command.
N/A
rule name
An existing rule. To display rule names, use the
CLAS-
SIFIER PROFILE LIST RULES
command.
N/A
rule number An existing rule. To display rule numbers, use the
CLASSIFIER PROFILE LIST RULES com-
mand.
N/A
droppri The drop priority set as either 0, 1 or 2:
0 = the lowest drop priority (green)
1 = the medium drop priority (yellow)
2 = the highest drop priority (red)
N/A