User guide

QOS Classifier command reference
iMG/RG Software Reference Manual (Quality of Service)
7-24
If the <protocol> value of the classifier profile set rule protocol command is set to any
or to a valueother than TCP or UDP, this rule compares the payload data length of the IP
packet (i.e., IP total length - IP header length) to the <min> and <max> values specified
here.
Options The following table gives the range of values for each option that can be specified with
this command and a default value for each option (if applicable).
Example --> classifier profile pr1 set rule r1 datalength 0 0
See also CLASSIFIER LIST PROFILES
CLASSIFIER PROFILE LIST RULES
7.1.5.1.10 CLASSIFIER PROFILE SET RULE DROPPRI
Syntax CLASSIFIER PROFILE {<name>|<number>} SET RULE {<rule
name>|<rule number>} DROPPRI <droppri>
Description This command configures the specified drop priority to be assigned to packets when the
rule is matched. The algorithmic dropper module reads the drop priority of the packet.
If the algorithmic dropper is not in use (for example, the scheduler device is not included
in the build), this setting has no effect.
Options The following table gives the range of values for each option that can be specified with
this command and a default value for each option (if applicable).
Option Description Default Value
name A name that identifies an existing profile. To
display profile names, use the classifier list
profiles command.
N/A
number A number that identifies an existing profile.
To display profile numbers, use the classifier
list profiles command.
N/A
rule number A number that identifies an existing rule. To
display rule numbers, use the classifier
profile list rules command.
N/A
min/max Minimum and maximum payload values. N/A