User guide

QOS Classifier command reference
iMG/RG Software Reference Manual (Quality of Service)
7-22
Description This command deletes a single rule that was added to an existing profile using the
CLASSIFIER PROFILE ADD RULE command.
Options The following table gives the range of values for each option that can be specified with
this command and a default value for each option (if applicable).
Example --> classifier profile pr1 delete rule r1
See also CLASSIFIER LIST PROFILES
CLASSIFIER PROFILE ADD RULE
7.1.5.1.8 CLASSIFIER PROFILE LIST RULES
Syntax CLASSIFIER PROFILE LIST RULES
Description This command displays the following information about the rules previously added to an
existing profile:
• Rule ID number
• Rule name
• Test details; each packet is tested against the following configurable fields:
• The source IP address and netmask
• The destination IP address and netmask
•The Differentiated Services Code Point (DSCP)
• The protocol name or number
• The source port range
• The destination port range
Option Description Default Value
name An existing profile. To display profile names, use the
CLASSIFIER LIST PROFILES command.
N/A
number An existing profile. To display profile numbers, use the
CLASSIFIER LIST PROFILES command.
N/A
rule name
An existing rule. To display rule names, use the CLASSI-
FIER PROFILE LIST RULES
command.
N/A
rule number
An existing rule. To display rule numbers, use the
CLAS-
SIFIER PROFILE LIST RULES
command.
N/A