User guide

QOS Classifier command reference
iMG/RG Software Reference Manual (Quality of Service)
7-20
Example --> classifier delete profile pr1
See also CLASSIFIER ADD PROFILE
7.1.5.1.4 CLASSIFIER LIST PROFILES
Syntax CLASSIFIER LIST PROFILES
Description This command lists all classifier profiles that have been created using the CLASSIFIER
ADD PROFILE command. It displays the following information about classifier profiles:
• Profile ID number
•Profile name
Example --> classifier list profiles
Classifier Profiles:
ID | Name
----|----------------
1 | pr1
2 | pr2
3 | pr3
---------------------
See also CLASSIFIER ADD PROFILE
7.1.5.1.5 CLASSIFIER PROFILE ADD RULE
Syntax CLASSIFIER PROFILE {<name>|<number>} ADD RULE <rule name>
Description This command adds a rule to an existing profile. Once you have created a rule, you can
configure it using the CLASSIFIER PROFILE SET RULE commands.
Options The following table gives the range of values for each option that can be specified with
this command and a default value for each option (if applicable).
Option Description Default Value
name An existing profile. To display profile names, use the
CLASSIFIER LIST PROFILES command.
N/A
number An existing profile. To display profile numbers, use the
CLASSIFIER LIST PROFILES command.
N/A