User guide

Classifier command reference QOS
7-19
iMG/RG Software Reference Manual (Quality of Service)
7.1.5.1.1 CLASSIFIER ADD PROFILE
Syntax CLASSIFIER ADD PROFILE <name>
Description This command creates a classifier profile. You can add rules to the profile using the classi-
fier profile add rule command. You can then set the profile to work on an ATM transport
or transports, using the TRANSPORT SET CLASSIFIER PROFILE command.
Options The following table gives the range of values for each option that can be specified with
this command and a default value for each option (if applicable).
Syntax
Example classifier add profile pr1
See also CLASSIFIER PROFILE ADD RULE
TRANSPORTS SET CLASSIFIER PROFILE
7.1.5.1.2 CLASSIFIER CLEAR PROFILES
Syntax classifier clear profiles
Description This command deletes all classifier profiles that were created using the classifier add pro-
file command. Any rules associated with the profiles are also deleted by this command.
Example --> classifier clear profiles
See also CLASSIFIER ADD PROFILE
7.1.5.1.3 CLASSIFIER DELETE PROFILE
Syntax CLASSIFIER DELETE PROFILE {<name>|<number>}
Description This command deletes a single profile that was created using the CLASSIFIER ADD
PROFILE command. Any rules associated with the profile are also deleted by this com-
mand.
Options The following table gives the range of values for each option that can be specified with
this command and a default value (if applicable).
Option Description Default Value
name An arbitrary name that identifies the profile. It can be
made up of one or more letters or a combination of let-
ters and digits, but it cannot start with a digit.
N/A