User guide

Webserver command reference Webserver
1-39
iMG/RG Software Reference Manual (System Configuration)
TABLE 1-2 Webserver Commands Provided by the CLI
1.2.3.1.1 WEBSERVER ENABLE/DISABLE
Syntax WEBSERVER {ENABLE|DISABLE}
Description This command enables or disables the Web Server process. By default, the Web Server
process is enabled. The webserver does not control only the web interface, disabling it
causes serious problem to the gateway.
Options The following table gives the range of values for each option that can be specified with
this command and a default value (if applicable).
Option
Fiber
A
Fiber
B
Fiber
C
Fiber
D
Fiber
E
Modular
ADSL
A
ADSL
B
ADSL
C
WEBSERVER ENABLE/DISABLE
XXXXX X X X X
WEBSERVER ADD MANAGEMENTSUBNET
XXXXX X X X X
WEBSERVER LIST MANAGEMENTSUBNETS
XXXXX X X X X
WEBSERVER CLEAR MANAGEMENTSUBNET
XXXXX X X X X
WEBSERVER DELETE MANAGEMENTSUBNET
XXXXX X X X X
WEBSERVER CLEAR STATS
XXXXX X X X X
WEBSERVER SET MANAGEMENTIP
XXXXX X X X X
WEBSERVER SET INTERFACE
XXXXX X X X X
WEBSERVER SET TELNET
XXXXX X X X X
WEBSERVER SET PORT
XXXXX X X X X
WEBSERVER SET TELNETPORT
XXXXX X X X X
WEBSERVER SET SECCLASSES
XXXXX X X X X
WEBSERVER SET TELNETSECCLASSES
XXXXX X X X X
WEBSERVER SHOW INFO
XXXXX X X X X
WEBSERVER SHOW STATS
XXXXX X X X X
WEBSERVER SHOW MANAGEMENTSUBNETS
XXXXX X X X X
WEBSERVER SHOW MEMORY
XXXXX X X X X