User guide

Common VoIP attributes: QoS, Media and DTMF-Relay VoIP Media command reference
iMG/RG Software Reference Manual (Voice Service)
6-128
6.4.6.1.3 VOIP MEDIA SET RTCP
Syntax VOIP MEDIA SET RTCP {OFF | ON}
Description This command enables RTCP.
Options The following table gives the range of values for each option that can be specified with
this command and a default value (if applicable).
Example --> voip media set rtcp on
See also VOIP MEDIA SET DSCP
6.4.6.1.4 VOIP MEDIA SET SESSIONTIMEOUT
Syntax VOIP MEDIA SET SESSIONTIMEOUT <mins>
Description This command sets the maximum timeout interval used to detect a fail in the incoming
RTP speech packets. If no RTP packet is received on the UDP port used by the active call
for a time longer than the SESSIONTIMEOUT value, the other endpoint is considered
disconnected and the active call is released.
Options The following table gives the range of values for each option that can be specified with
this command and a default value (if applicable).
Example --> voip media set sessiontimeout 1
See also VOIP MEDIA SHOW
6.4.6.1.5 VOIP MEDIA SHOW
Syntax VOIP MEDIA SHOW
Option Description Default Value
OFF Turn off the RTCP support. off
ON Enable the RTCP support.
Option Description Default Value
mins The SESSIONTIMEOUT value expressed in min-
utes. Available values are form 0 mins to 1440
mins (24 hours).0 mins is equivalent to disable
the SessionTimeOut feature.
0