User guide

Web pages Webserver
1-37
iMG/RG Software Reference Manual (System Configuration)
• Recovery Application code version
• System Name, Location and Contact
• Routing and ARP table
• Wireless stations
1.2.2.2 Configuration page
The Configuration page is used to access Wireless and DHCP Server configuration parameters.
On the Wireless configuration pages it’s possible to specify both Basic and Advanced parameters.
• Wireless Mode
• Network Name and preferred channels
• Authentication and Encryption protocols
• MAC adddress filtering (white and black list)
On the DHCP Server configuration page it’s possible configure the dhcp server address ranges, fixed hosts and
additional dhcp options.
1.2.2.3 Security page
The Security page includes settings related to Firewall rules, NAT reserved mapping rules and Domain Filtering.
It’s possible therefore enable or disable the firewall and define for the three available policies the traffic blocking
rules separately.
It’s also possible configure NAT reserved mapping schemes to allow specific and-user programs to accept
incoming connections even if behind the NAT engine.
It’s also possible configure a virtual server that can abe accessed from public network keeping protected the
internal end-user network from external attacks.
1.2.2.4 Services page
The Services page allows to configure the routing table.
It’s possible enter manually static routes or enable the RIP support over the existing IP interfaces.
1.2.2.5 Admin page
The Admin page is used to perform the following operations:
• Firmware upgrade (Main Application code or Recovery Application code)