User guide

VOIP QOS command reference Common VoIP attributes: QoS, Media and DTMF-Relay
6-125
iMG/RG Software Reference Manual (Voice Service)
Description This command sets the value of the tos field in the IP header only for VoIP signaling origi-
nated packets.
Note: To disable TOS support (i.e. remove any previous configuration performed on TOS field on signalling and
speech packets) use the VOIP QOS SET NONE SIGNALING-PROTOCOL command.
Options The following table gives the range of values for each option that can be specified with
this command and a default value (if applicable).
Example --> voip qos set tos 4 signaling-protocol
See also VOIP QOS SET TOS
VOIP QOS SHOW
6.4.5.1.6 VOIP QOS SET TOS MEDIA-PROTOCOL
Syntax VOIP QOS SET {TOS <tos-code> | NONE} MEDIA-PROTOCOL
Description This command sets the value of the tos field in the IP header only for VoIP media (RTP)
originated packets.
Note: To disable TOS support (i.e. remove any previous configuration performed on TOS field on signalling and
speech packets) use the VOIP QOS SET NONE MEDIA-PROTOCOL command.
Options The following table gives the range of values for each option that can be specified with
this command and a default value (if applicable).
Example --> voip qos set tos 7 media-protocol
See also VOIP QOS SET TOS
VOIP QOS SHOW
Option Description Default Value
tos-code
The value of
tos field. Acceptable value are in the range 0
to 7
none
Option Description Default Value
tos-code
The value of
tos field. Acceptable value are in the range 0
to 7
none