User guide

Common VoIP attributes: QoS, Media and DTMF-Relay VOIP QOS command reference
iMG/RG Software Reference Manual (Voice Service)
6-124
Description This command sets the value of the dscp field in the IP header only for VoIP media (RTP)
originated packets.
Note: To disable DSCP support (i.e. remove any previous configuration performed on DSCP field on signalling
and speech packets) use the VOIP QOS SET NONE MEDIA-PROTOCOL command.
Options The following table gives the range of values for each option that can be specified with
this command and a default value (if applicable).
Example --> voip qos set dscp 63 media-protocol
See also VOIP QOS SET DSCP
VOIP QOS SHOW
6.4.5.1.4 VOIP QOS SET TOS
Syntax VOIP QOS SET {TOS <tos-code> | NONE}
Description This command sets the value of the tos field in the IP header for both VoIP signaling and
media (RTP) originated packets.
Note: To disable TOS support (i.e. remove any previous configuration performed on TOS field on signalling
and speech packets) use the VOIP QOS SET NONE command.
Options The following table gives the range of values for each option that can be specified with
this command and a default value (if applicable).
Example --> voip qos set tos 4
See also VOIP QOS SHOW
6.4.5.1.5 VOIP QOS SET TOS SIGNALING-PROTOCOL
Syntax VOIP QOS SET {TOS <tos-code> | NONE} SIGNALING-PROTOCOL
Option Description Default Value
dscp-code
The value of
dscp field. Acceptable value are
from 0 to 63
none
Option Description Default Value
tos-code
The value of
tos field. Acceptable value are in
the range 0 to 7
none