User guide

VoIP EP command reference VoIP phone ports
6-119
iMG/RG Software Reference Manual (Voice Service)
voip ep SIGNALING DELETE
voip ep SIGNALING LIST
voip ep SIGNALING SHOW
6.3.3.1.53 VOIP EP SIGNALING SHOW
Syntax VOIP EP SIGNALING SHOW <name>
Description This command shows a previously created customized signaling.
The following information is displayed:
• signaling entry type
• signaling entry time out
• signaling entry frequency
• signaling entry cadence
• signaling entry attached endpoints
Options The following table gives the range of values for each option, which can be specified with
this command, and a default value (if applicable).
Example --> voip ep signaling show mydial
Custom Signaling Protocol item: mydial
----------------------------------------------------------
Type: dial-tone
Time-Out:
Frequency: 240x340/425x525/340+480 Hz.
Cadence: -3(+0.5-0.5)+continuous(+1-1)
Attached ports: tel1
See also voip ep SIGNALING ADD
voip ep SIGNALING CREATE
voip ep SIGNALING DELETE
Option Description Default Value
name A name that identifies an existing customized signal-
ling created with the VOIP EP SIGNALING CREATE
command. To display the existing access port names,
use the voip ep list command.
N/A