User guide

VoIP phone ports VoIP EP command reference
iMG/RG Software Reference Manual (Voice Service)
6-118
• signaling entry ID value
• signaling entry name
• signaling entry type
Example --> voip ep signaling list
Custom Signaling Protocol items:
ID | Name | Type
-----|------------|---------------------------------------
1 | mydial | dial-tone
2 | mybusy | busy-tone
3 | myring | cai
-----|------------|---------------------------------------
See also VOIP EP SIGNALING ADD
VOIP EP SIGNALING CREATE
VOIP EP SIGNAaLING DELETE
VOIP EP SIGNAaLING REMOVE
VOIP EP SIGNALING SHOW
6.3.3.1.52 VOIP EP SIGNALING REMOVE
Syntax VOIP EP SIGNALING REMOVE <name> PORT <port>
Description This command removes a previously added customized signaling from an existing end-
point.
Options The following table gives the range of values for each option, which can be specified with
this command, and a default value (if applicable).
Example --> voip ep signaling remove myring port prt0
See also voip ep SIGNALING ADD
voip ep SIGNALING CREATE
Option Description Default Value
name A name that identifies an existing customized sig-
nalling created with the VOIP EP SIGNALING
CREATE command. To display the existing access
port names, use the voip ep list command.
N/A
port A name that identifies an existing access port. To
display the existing customized signalling use the
voip ep SINALING list command.
N/A