User guide

VoIP EP command reference VoIP phone ports
6-115
iMG/RG Software Reference Manual (Voice Service)
Example --> voip ep signaling add myring port prt0
See also voip ep SIGNALING CREATE
voip ep SIGNALING DELETE
voip ep SIGNALING LIST
voip ep SIGNALING REMOVE
voip ep SIGNALING SHOW
6.3.3.1.49 VOIP EP SIGNALING CREATE
Syntax VOIP EP SIGNALING CREATE <name> TYPE <type> TIME-OUT <secs>
FREQUENCY <frequency> CADENCE <cadence>
Description This command creates a new entry in the custom signaling list. Each customized signal
must have a different <name>. If the customized signaling already exists, an error message
is raised.
The type of the signaling, the used frequency and the cadence must be provided. The set-
ting of a time-out is optional and is available only for the ring type.
Options The following table gives the range of values for each option, which can be specified with
this command, and a default value (if applicable).
Option Description Default Value
name A name that identifies an existing customized sig-
nalling created with the VOIP EP SIGNALING
CREATE command. To display the existing access
port names, use the voip ep list command.
N/A
port A name that identifies an existing access port. To
display the existing customized signalling use the
voip ep SIGNALING list command.
N/A
Option Description Default Value
name An arbitrary name that identifies the customized
signaling port. It can be made up of one or more
letters, digit or a combination of letters and dig-
its. To display the existing access port names, use
the voip ep list command.
N/A