User guide

VoIP phone ports VoIP EP command reference
iMG/RG Software Reference Manual (Voice Service)
6-114
Example --> voip ep analogue show prt0 cfwd
Gateway access port - Call Forwarding rules
--------------------------------------------------------------------
all-calls:
active false
forwarding number
on-prefix *72
on-suffix #
off-prefix *73
on-busy:
active false
forwarding number
on-prefix *222
on-suffix #
off-prefix *223
on-no-answer:
active false
forwarding number
on-prefix *333
on-suffix #
off-prefix *334
timeout 10 secs.
See also VOIP EP ANALOGUE SET CFWD
6.3.3.1.48 VOIP EP SIGNALING ADD
Syntax VOIP EP SIGNALING ADD <name> PORT <port>
Description This command adds a previously created custom signal to an existing endpoint.
Options The following table gives the range of values for each option, which can be specified with
this command, and a default value (if applicable).
Option Description Default Value
name An existing access port. To display the existing
access port names, use the VOIP EP ANA-
LOGUE LIST command.
N/A